The Motor101A Includes:
(1) State101A: State Data Logger
(1) Current Switch
(1) IFC200: Interface Cable
The Motor101A was designed to measure and record the on/off
status changes for motors or other equipment drawing up to 200 Amps.
Just clamp the Motor101A to a wire and when the current passing
through exceeds 150 mA the output changes, providing a voltage for the Motor101A to measure. This device can hold up to 465,578 readings, but memory will only be used if the status has changed.
The Motor101A is compatible with the latest MadgeTech 4 Software making starting, stopping, and downloading simple and easy. Graphical, tabular, and summary data is provided for analysis and can be viewed as customizable engineering units.

General

Memory

465,578 readings

Reading Rate

4 Hz to 1 every 24 hours

Push-Button Start

Yes

Battery Life

10 years typical

Dimensions

Data Logger: 1.4 in x 2.2 in x 0.6 in (36 mm x 56 mm x 16 mm)
Current Switch: 2.1 in x 3.5 in x 1.0 in (54 mm x 89 mm x 16 mm)

Material

ABS Plastic

Required Interface Package

IFC200

Trip Point

0.15 A (150 mA) fixed (200 mA AC for 50 Hz operation)

Status Output

N.O.1.0 A at 30 VAC/DC

Housing

Split Core

State Resolution

1 second (reading rate dependent)

Amperage Range

0.15 to 200 Amps

State

Baud Rate

125,000

LED Indicators

Red and Green

Operating Environment

-15 °C to +40 °C (+5 °F to +104 °F), 10 %RH to 90 %RH non-condensing

Approvals

CE

Motor101A — 900381-00